Interlux Nautical Enamel - Gallon NAU130-1

Description

Sand the entire surface with 220-grit sandpaper until a flat matte finish is obtained. Fill any surface imperfections with approved filler for alkyd topside paint use. Cleaner Mineral Spirits or Naphtha Thinning: Do not thin Ventilation and Humidity Control Apply in dry, well ventilated conditions, Avoid excessively humid conditions, over 80% relative humidity. Economically priced and formulated to provide performance, value and reliability these finishes are durable and offers toughness, chemical resistance and hide and wear characteristics. Remove surface contamination by wiping down the surface with Mineral Spirits or Naphtha using the two-rag method. If the surface is in poor condition and to achieve optimal results, use a primer approved for alkyd topside paints as per manufacturer's instructions. Flush with fresh water to remove the soap residue and allow surface to dry. Fill any surface imperfections with approved filler for topside paint use. Bare Wood Scrub the surface thoroughly with a stiff brush using soap and water. Brush Natural bristle brush Roller Use a solvent resistant small closed cell foam roller Airless Spray: Tip Size: 0.33 mm/13 thou. Nautical Enamels are ideal for decks, hulls and interiors in the marine environment. Nautical Enamels are one-part professional quality interior and exterior alkyd enamels. Wipe the sanding residue off the surface with Mineral Spirits or Naphtha using the two-rag method. Clear epoxy when. Pressure adjust as needed.

Key Features

• After all old paint has been removed, follow preparation instructions for bare fiberglass. - Bare Wood Scrub the surface thoroughly with a stiff brush using soap and water.
• HOW TO APPLY INTERLUX NAUTICAL ENAMEL Mixing Stir well before and during use.
• Economically priced and formulated to provide performance, value and reliability these finishes are durable and offers toughness, chemical resistance and hide and wear characteristics.
• Flush with fresh water to remove the soap residue and allow surface to dry.
• Brush Natural bristle brush Roller Use a solvent resistant small closed cell foam roller Airless Spray: Tip Size: 0.33 mm/13 thou.
• Nautical Enamels are available in a high gloss, semi gloss and flat finish and can be applied to any properly prepared fiberglass, metal or wood surfaces above the waterline, inside or out.