Grey Man Tactical 9.25 x 15 Rigid Molle Panel Black GMT-RMP-08

Description

Adhesive backed Velcro To adhere the Adhesive backed Velcro Hook tape to your RMP panel: - Ensure the panel is cleaned with an alcohol wipe and completely dry. Ensure the panel is cleaned with an alcohol wipe and completely dry. Peel the backing off the adhesive backed velcro tape and place the hook section onto the panel. Product Specifications Width: 9.25" (234.95mm) Height: 15" (381mm) Thickness: 0.188" (4.77mm) Material: High Strength Polyethylene Weight: 9.5 ounces (269.32 grams) Backpack Compatibility The 9.25in x 15in RMP Backpack Insert fits:- 5.11 Tactical Rush All. Grommet / Chicago - Punch a hole in the fabric and secure a grommet to prevent ripping. Press firmly into place, and then press further with a rolli. For any backpack without internal MOLLE webbing: Hydration Bladder Loop - Secure the panel at the top of the internal main pocket by using a hydration bladder loop if available. Quick access to your gear is enhanced by the consistent positioning and customizable layout. For backpacks with Internal Velcro Loop: - Purchase "Low Profile Hook - Adhesive Backed - 3/4" Width" from GMT. Apply heat from a hair dryer to warm up the panel and the velcro hook tape, enabling the adhesive to "run" or liquefy enough to seep into the panel for a better bond. You can loop a velcro one wrap, Velcro Cinch Strap, Web Dominator, or Grimloc through the internal MOLLE webbing of the backpack and secure the panel to the pack using one of those methods.

Key Features

• Product Specifications Width: 9.25" (234.95mm) Height: 15" (381mm) Thickness: 0.188" (4.77mm) Material: High Strength Polyethylene Weight: 9.5 ounces (269.32 grams) Backpack Compatibility The 9.25in x 15in RMP Backpack Insert fits:- 5.11.
• Press firmly into place, and then press further with a rolling pin or place heavy weight onto panel to compress and ensure full contact. - Apply heat from a hair dryer to warm up the panel and the velcro hook tape, enabling the adhesive to.
• Grommet / Chicago - Punch a hole in the fabric and secure a grommet to prevent ripping.
• Optionally, use 3M Primer 94 to prime the surface before sticking the adhesive backed velcro into place.
• Use a chicago screw to secure the panel to the grommet.