Awlgrip Polyester Urethane Topcoat Base - Snow White High Gloss - Quart G8044

Description

Mixing and Reduction Spray Mix one part Topcoat Base Component with one part Awl Cat #2 G3010 spray converter to a smooth, homogenous mixture. Smooth sanding until all of the guide coat is removed yields a texture free surface. Overall mixture is 2:1:3/4-1 by volume. For years, serious boat owners have demanded Awlgrip coatings systems to protect their valuable investments from harsh marine elements. If preferred, 3 coats may be used. The second coat is a slightly heavy tack coat with the third coat just wet enough to obtain full hide or color coverage. Allow second coat to "flash off" 30 to 45 minutes until only slightly tacky before applying third coat. Overall mix is 1:1 1/2 by volume. Long lasting; high gloss resistance to sun, saltwater, chemicals and abrasion Appropriate for use on fiberglass, steel and wood Low maintenance Above the waterline use only Available in quarts and gallons Custom colors available ***. On large surfaces such as hull sides, transoms, and house sides, first roll the Awlgrip Topcoat and then smooth the roller stipple b. Sanding between coats with 280 to 400 grit paper will provide a smoother finish. Surface Preparation Awlgrip colors should be applied over properly prepared 545 primer or in brush/roller applications Awl-Quik primer. Reduce 25-33% with T0031. Application Instructions General: Sanded surface must be dry and clean. Regardless of application method 2 coats is the minimum. 25% reduction is a standard mix. 40% is maximum.

Key Features

• Allow second coat to "flash off" 30 to 45 minutes until only slightly tacky before applying third coat.
• Do not apply 3005 over white or pastel colors, or to bare wood.
• Sanding between coats with 280 to 400 grit paper will provide a smoother finish.
• Awlgrip provides a durable high gloss finish to wood, fiberglass, aluminum or steel and can be applied with a roller, brush or spray gun.
• Allow tack coat to "flash off" 30 to 45 minutes.
• Long lasting; high gloss resistance to sun, saltwater, chemicals and abrasion Appropriate for use on fiberglass, steel and wood Low maintenance Above the waterline use only Available in quarts and gallons Custom colors available ***.